|
 M series thermoforming systems
M series thermoforming systems
M850L & M1100L Thermoforming Systems
- Products: Trays, plates, bowls, hinge lid boxes
- Materials: EPS and other shallow thermo materials
- Forming Type: Vacuum
- Max. cycle speed: 35 cpm; deep and sheet gauge dependent
- Heating Type: Ceramic panels – 3600 ~ 5000 mm oven
- Max. Sheet width: 950mm & 1200mm
- Max. Forming area: 850mm & 1100mm x 1200mm
- Min. Forming area: 600mm & 850mm x 760mm
- Draw of Depth: 100mm standard; deeper is available
- Platen drive: AC servo motor, toggle linkage
- Web Index drive: AC servo motor, Chain rail
- System control: PLC with HMI touch screen
- Cooling: 80 l/min. 20°C
- Air: 2.83 M3/min. 7 Kg/cm²
- Layout: 10 M x 4 M x 5 M (LxWxH)
- Weight: 9,000 Kgs & 10,000 Kgs
Light Duty Horizontal Trim Press
- Products: Shallow containers
- Materials: EPS, HIPS, OPS, PVC, PP, APET
- Platen opening: 360mm x 1080mm & 1360mm
- Sheet max. width: 950mm & 1200mm
- Stroke: Max. 180mm
- Draw of Depth: 110mm
- Max. speed: 150 cpm, stroke and products dependent
- Stacking: Packing table
- Platen drive: AC servo motor, crank run
- Web Index drive: AC servo motor, wheel nip
- Counting: Miss-trim or marker
- System control: PLC with HMI touch screen
- Air: 1 M3/min. 7 Kg/cm²
- Layout: 5 M x 3 M x 4 M (LxWxH)
- Weight: 5,000 Kgs
M850H & M1125H Thermoforming systems
- Products: Cups, plates, trays, containers
- Materials: PP, APET, HIPS, OPS, PVC
- Forming Type: Pressure & vacuum
- Max. cycle speed: 30, resin; deep and sheet gauge dependent
- Clamping force: max. 50 kN
- Heating Type: Ceramic panels – 4,000 ~5,000mm oven
- Max. Sheet width: 950mm & 1200mm
- Max. Forming area: 850mm & 1100mm x 1100mm
- Min. Forming area: 600mm & 850mm x 760mm
- Draw of Depth: 150mm standard; deeper is available
- Platen drive: AC servo motor, toggle linkage
- Web Index drive: AC servo motor, Chain rail
- System control: PLC with HMI touch screen
- Cooling: 100 l/min. 20°C
- Air: 5.7 M3/min. 7 Kg/cm²
- Layout: 10 M x 4 M x 5 M (LxWxH)
- Weight: 12,000 Kgs & 13,000 Kgs
Heavy Duty Horizontal Trim Press
- Products: Cups, Deep draw containers
- Materials: HIPS, OPS, EPS, PVC, PP, APET
- Platen opening: 360mm x 1080mm & 1360mm
- Sheet max. width: 950mm & 1200mm
- Stroke: Max. 265mm
- Draw of Depth: 150mm standard, deeper is available
- Max. speed: 125 cpm, stroke and products dependent
- Stacking: Packing table
- Platen drive: AC servo motor, crank run
- Web Index drive: AC servo motor, wheel nip
- Product Ejector: AC servo motor, crank run
- System control: PLC with HMI touch screen
- Air: 1 M3/min. 7 Kg/cm²
- Layout: 6 M x 3 M x 4 M (LxWxH)
- Weight: 6,000 Kgs
Vertical Trim Press
- Products: Shallow containers
- Materials: PP, APET, HIPS, OPS, EPS, PVC
- Platen opening: 300mm x 1200mm
- Sheet max. width: 950mm & 1200mm
- Stroke: 180mm; 150mm and 130mm
- Max. Draw of Depth: 100mm
- Stacking: Air-Hydraulic elevator or Servo elevator
- Pre-punch: Optional
- Max. speed: 100 cpm, stroke and products dependent
- Platen drive: AC servo motor, crank run
- Web Index drive: AC servo motor, wheel nip on in-feed and pull both
- Product Ejector: Pneumatic or AC servo ejector
- System control: PLC with HMI touch screen
- Air: 2.58 M3/min. 7 Kg/cm²
- Layout: 4 M x 3 M x 2 M (LxWxH)
- Weight: 5,000 Kgs
Relative Product :
|
